repairing a leaky faucet

Repairing a Leaky Faucet – The DIY Way

Repairing a Leaky Faucet in your home? It’s extremely irritating to find a leaky faucet at home as the dripping sound can drive you crazy. If you don’t want the leaky nuisance snowball into a real problem then address it quickly. The good news is that you can fix a leaky faucet quickly without burning a hole in your pocket. Since the task is relatively simpler, you can spare the plumber and take the DIY way. Several factors can actually result in leakage and you need to identify the exact ones before picking up the wrench. Let’s find out some of the most common reasons behind a dripping faucet.

Best 24 Hour Emergency Plumbers in Calgary

What results in a leaky faucet?

  • The valve seat’s corrosion
  • Buildup on the valve parts and washers
  • Wear and tear of the O-rings and seals
  • Other loose parts

DIY Tools for Faucet Repair:

As mentioned earlier, you won’t need to call up the plumber and instead complete the task quickly by using certain tools. It will not take more than an hour to complete if you follow all the instructions carefully.

5 Warning for DIY Faucet Repair for Homeowners

Here’s a list of tools you will need before starting the repair work:

  • Flat head screwdriver
  • WD-40/CRC (lubricants)
  • C Wrench
  • O-rings and washers
  • Scouring pad
  • White vinegar

Step 1: Shut off the water supply

Prior to beginning the repair work, it’s important that you shut off the main water supply. This will obviously prevent unnecessary flooding of the kitchen or bathroom. Shut off valves are usually located below the sink, so shutting them won’t take much legwork. Turning off the main water supply to your house is a good idea in case you fail to locate the shut off valves below the sinks.  Drain off excess water in the pipe by turning on the faucet. You can use a stopper for covering the drain so that smaller parts aren’t washed down the drain during repair.

Best Faucet Replacement Calgary Plumbers

Step 2: Get rid of decorative parts

Get rid of the decorative handles by using the flathead screwdriver. You will often come across corroded screws and if that’s the case then use lubricants to loosen those parts. However, always note where each part or screw is placed to avoid messing up while reinstalling. 

Step3: Inspection of Faucet part

You will need to remove the packing nut with the help of a wrench to reveal the inner stem. Now you’ve to take out the stem from the valve. You might find that the packing nut or the stem has a buildup due to corrosion – clean up the deposits. Additionally you should also check the washers and the O-ring and in case they’re damaged, just replace them with new ones. Clean up all the parts carefully to remove any buildups of deposits. Often people make the mistake of replacing worn out washers or O-rings of other sizes, so ensure that replaced parts are of exact size.

Quick Video on Repairing a Kitchen Faucet


Time to Reassemble the Faucet

Now that you’re done with the repair, it’s time to reassemble and find out if your efforts have borne fruit or not. While assembling, you have to take extra care to ensure that all the parts are assembled properly. After reassembling, slowly turn on the faucet and check whether you’ve successfully fixed the faucet or need professional help.   

In case you find the faucet still dripping then something else might be causing the leak. You might even have to replace the faucet because with time the wear and tear takes a toll on it. Majority of the faucets last for over 10 years; however, you might need to replace some within a few years. Actually, the life of a faucet depends on numerous factors like usage, water quality and frequency of maintenance.

If you live in and around Calgary, you can always contact Urban Piping as it’s one of the best professional plumbing services in the region. They are licensed, bonded, insured, and even hold A+ rating with the Better Business Bureau. Do a Google search and you can find hundreds of FIVE star reviews online as they’ve a long list of satisfied customers.

Best Faucet Repair Calgary Plumbers

Repairing a leaky faucet takes a little more than just a wrench or screwdriver. DIY isn’t everyone’s cup of tea so if you aren’t very comfortable picking up the wrench, call a professional plumber to fix a leaky faucet at home. Professional plumbing services like Urban Piping have experienced plumbers in their team and use latest plumbing equipments and techniques to fix leaky faucets. They can take care of the leakage and fix the faucet quickly. 

Published On: November 11th, 2019Categories: Faucets and TapsTags: , , ,

Plumbing Topics

The Complete Guide to Poly B™ Piping

Repairing a Leaky Faucet - The DIY Way 1


For a limited time, we’ll send you a FREE copy of our comprehensive guide to Poly B™™ Piping. This exclusive guide contains vital information that will help you better understand Poly B™™ piping and show you exactly what to look for when hiring a Poly B™™ contractor.

Your email is kept private between us and we do not send spam email.